↑ ↓
bobby 2024-05-25 0 point
how do u use gamepad, plz any help
↑ ↓
Gamenator01 2024-05-17 0 point
I'm stuck in the cryo freezer room since the conveyor belt that's supposed to carry you past the beams moves me too slowly, so I unfreeze before I can get past them. I've only managed to find one other instance of someone having this problem and I don't know how to get around it. Is it to do with the Physx drivers? Because as far as I know I've installed them correctly
↑ ↓
Larry Tate Charlie 2024-05-16 0 point
Elamigos version lets you change language when installing the game, it also works straight out from the installation on Windows 11.
You can delete the "videos" folder in-game to speed up the loading and skip the game cutscenes, useful for replays.
If you care about unsupported resolutions check pcgamingwiki for vsync and resolution fixes and tweaks.
Hope it helps.
↑ ↓
SyrTaggart 2024-05-10 0 point
Does anyone know how to change the language ?
↑ ↓
BT Boo 2024-05-06 0 point
tres bien muito bom
↑ ↓
Brothers 2024-05-05 -2 points
Tried everything... still not opening up..
↑ ↓
vks 2024-03-31 0 point
amzing ,outstamding,wonderfull , insane , mindblowing
↑ ↓
admin 2024-03-28 0 point
@TWOLEFTHANDSGAMING According to WSGF, that resolution is not supported https://www.wsgf.org/dr/x-men-origins-wolverine/en (check Resolutions & Configurations). Unreal Engine 3 wasn't supporting some of "exotic" resolutions, try to enter some other resolution in .ini-file and see what happens
↑ ↓
TwoLeftHandsGaming 2024-03-15 1 point
I'm trying to set the game's display resolution to 1600x900, and I edit it into the WEngine.ini file as instructed, but then when I open the game after saving my changes, the game reverts to it's default 1280x720 resolution. Am I doing something wrong?
↑ ↓
DAN53 2024-03-14 1 point
Very Important:
"dxvk-2.3.tar", unzips with winrar, etc, download from github.
Vulkan wrapper helped tons !!
Use the files in the 32bit folder for directx 9.0c:
Put d3d9.dll and dxgi.dll alongside the game executable.
Also be sure to run the game at 60 (not 59, etc).
↑ ↓
DAN53 2024-03-10 0 point
Oh, and be sure to uninstall your actual Physx drivers, and install the legacy ones mentioned below, or load times will be excruciating.
↑ ↓
DAN53 2024-03-10 0 point
Good game !
Cheat Engine:
--- Health Red Bar, FLOAT, address ens in 8 (examples 13641EF8/25924298, etc), full Exact starting Value = 50.0000 (grows 5 each level, plus more with 4 points on skill health.
Got health maxed at 320 at max level 40.
--- Experience, 4 Bytes, address ends on C on my install at least, grows by value shown each time you kill a foe.
At some 1,400,000 or so you are maxed at level 40.
Character key shows green Exp bar.
--- Skill points, 4 Bytes, got at certain levels, its address is just 4 Bytes above that of Experience.
↑ ↓
admin 2024-02-26 0 point
Yes, if you have troubles with the game - make sure to install PhysX Legacy Drivers, looks like the game works the best with PhysX 9.13.1220 https://www.nvidia.com/en-us/drivers/physx/9_13_1220/physx-9-13-1220-driver/
@MICHAEL S Don't know if that helps but try to use DXVK, it is wrapper that makes old DirectX games to run through Vulkan API, maybe that will help https://github.com/doitsujin/dxvk
↑ ↓
ArthurMorgan 2024-02-25 1 point
Thanks Gnake, i tried everything on the latest Windows and the only method that worked was yours.
↑ ↓
XxxsmartestmanalivexxX 2024-02-25 -2 points
How do people still ask how to make old games fix, like how stupid can you get, it is so easy, literally follow instructions jesus christ.
↑ ↓
Michael S 2024-02-24 -1 point
I got the game to play but it slows up a lot like lagging almost is there something I can download for that?
↑ ↓
admin 2024-02-22 2 points
@MICHAEL S NoDVD allows to play without the disc, you just need to replace exe-file in game folder with exe-file from NoDVD archive. That archive is available in Downloads
@MATEUS GUIMARÃES The game doesn't support PlayStation controllers, try to use XInput Wrapper, there's a lot of tutorials how to set DualShock with XInput Wrapper
@JAE Make sure to install PhysX Legacy Drivers, to fix long loading. Also, you can try to disable intro videos, for some users it helped https://www.pcgamingwiki.com/wiki/X-Men_Origins:_Wolverine_-_Uncaged_Edition#Skip_intro_videos
↑ ↓
Michael S 2024-02-22 0 point
What does NODVD mean and where do i find it? what do i do with the files after the cd is brought up? Drag them out into a new folder? Everytime i press Wolverine.Exe it keeps telling me to run original disc....
↑ ↓
Mateus Guimarães 2024-02-17 -1 point
como que faz pra jogar com o controle de ps4?*
↑ ↓
Mateus Guimarães 2024-02-17 -2 points
Como faz para jogar no controle ?
↑ ↓
Jae 2024-02-14 1 point
How to fix long loading.
↑ ↓
pratik 2024-02-11 -1 point
it's just showing batman knight core pack and then the game does not respond i think i wasted me 4 gb data
↑ ↓
Zoeypenelope 2024-02-03 0 point
The game works on DirectX 9, so if you're using Windows 8, 8.1, 10 or 11 - you need to enable Direct Play: Go to Control Panel, and select 'Programs'. Select 'Turn Windows features on and off', click on 'Legacy Components' and check the box 'Direct Play'. Select OK, once the installation is done, restart your computer
↑ ↓
Davide88877 2024-02-01 -1 point
Il link di prima non si apre in automatico, eccolo:
https://gamefaqs.gamespot.com/boards/916373-pc/71073641?page=1/
↑ ↓
Davide88877 2024-02-01 0 point
If can help the users below, you can fix the 'non start' bug in this way:
https://gamefaqs.gamespot.com/boards/916373-pc/71073641?page=1
please follow the AnatomyHorror instruction, installing the physx 9.13.1220 driver.
↑ ↓
LarryBalls343 2024-01-31 2 points
Thank you, installing amigos version worked first time, no other fixes needed, using latest windows 11 & Nvidia drivers/versions.
↑ ↓
admin 2024-01-31 3 points
I slightly updated the guide, added few more advise for possible troubles. For Windows 10/11 users - make sure that you installed PhysX drivers and enabled DirectPlay before launch. If it didn't help - you may try to use DXVK to run the game through Vulkan API, maybe that would help (link to DXVK is in the guide above)
↑ ↓
Gnake 2024-01-17 3 points
To anyone having issues launching the game, you might wanna try installing this PhysX 2014: https://www.nvidia.com/en-us/drivers/physx/9_13_1220/physx-9-13-1220-driver/
↑ ↓
Larrytit*32 2023-12-21 2 points
If you delete the "Movies" folder in the root directory of the game, it skips the cutscenes and speeds up the loading times; useful for replays!
↑ ↓
RICKROSS 2023-09-26 2 points
It installed on windows 11 but wont run can someone help me guide me exactly what am i suppose to do cause I am noob in all of this. pls thank you
↑ ↓
Dis 2023-08-26 1 point
Working on Windows 11
Been having a blast on this, so many memories. Originally I only played the 360 version, then the PS3 version later on.
Why this never got a remaster or Series S/X upgrade with BC is beyond me. The graphics at times do shine at higher resolution when fixes are applied.
Issue on the Sentinel level with the ice freezer section, slow character movement on the transport belt. an get around it with a guard and throwing him into the beams or getting lucky.
Other than that it has and still is a blast.
↑ ↓
JJC 2023-08-15 1 point
It won't install Direct x 9. Any solutions? I'm using the repack Corepack.
↑ ↓
samr 2023-07-21 -1 point
Obrigado. Funcionando 100¨% aqui
↑ ↓
Mic 2023-05-30 1 point
So I installed the original iso and mounted it and then installed the game, but I can't replace wolverine.exe with the noDVD one. it says the disc needs 50mbs more space so I don't know what to do.
↑ ↓
jack 2023-05-26 0 point
x-men origins wolverine i exit game and go back in it does not go to the checkpoint and it just asks for a new game
↑ ↓
foxy 2023-04-04 4 points
I tried both repacks, installed several vcredist packages, physX legacy driver, DX9 and cannot get it to run. There's no error output, the exe just closes itself instantly after starting. Shortcut is set to admin rights and compatibility mode, tried XP and Vista.
Running Windows 10 Pro 22H2 on an Ryzen 5600G with latest drivers. Suggestions?
↑ ↓
daniel 2023-04-02 0 point
I am running it on windows 10 after updating visual C++ Redistributable, and yet the game is not starting at all.
↑ ↓
kasiraj 2023-03-25 0 point
it wont open on windows 11...what should i do?
↑ ↓
Nick 2023-02-20 0 point
I followed the steps but the game wont launch. I used the repack, mounted, installed, and changed compatibility. When I try to launch nothing happens in task manager.
↑ ↓
Baxin 2023-02-15 0 point
Obrigado. Funcionando 100¨% aqui
↑ ↓
Jow 2023-01-23 2 points
I had to install PhysX using this method: https://www.pcgamingwiki.com/wiki/Troubleshooting_guide/Startup_and_launching_problems#Install_Nvidia_PhysX
↑ ↓
admin 2023-01-05 0 point
@MATT Just install Microsoft Visual C++ Redistributable, it's like a minimum requirement for any old game. I'd recommend to install all packages for all years, including 2005, 2008, 2010 editions, etc.; you can find download links here https://learn.microsoft.com/en-US/cpp/windows/latest-supported-vc-redist?view=msvc-170
↑ ↓
Matt 2023-01-04 0 point
I am running Windows 10, followed the instructions including the compatibility mode for Windows XP SP2 and run as admin but I get a MS Visual C++ error. is anyone else getting that error?
↑ ↓
abstriker 2023-01-02 0 point
Thanks abandonware. just for additional info. The Elamigos version can also be downloaded from here:
https://www.elamigos-games.com/games/x-men-origins-wolverine
↑ ↓
admin 2022-12-22 3 points
@BYEXSPENCER Okay, checked it once again today, everything worked fine on my Windows 10 PC with AMD video card, I just used NoDVD and run the game in compatibility mode with Windows XP SP2 and as administrator. Make sure you have DirectPlay enabled https://www.pcgamingwiki.com/wiki/Troubleshooting_guide/Startup_and_launching_problems#DirectPlay_games_do_not_work_or_prompt_for_DirectPlay_feature.2FDLL
I searched in the Internet - people recommend to install PhysX drivers from the disc or PhysX Legacy Driver https://www.nvidia.com/en-us/drivers/physx/physx-9-13-0604-legacy-driver/. I have it installed, maybe that's why I had no problem with launch, I'll add it to Notes.
Also, some people recommend try to edit config file to skip in-game videos (intros and pre-rendered cutscenes). You can find instructions how to edit config file here https://www.pcgamingwiki.com/wiki/X-Men_Origins:_Wolverine#Skip_intro_videos
↑ ↓
byexspencer 2022-12-21 1 point
Update: Game just takes an eternity to start after the splash screen but the main menu doesn't exist & when I am able to start, it infinitely loads after the intro cutscenes and the game never starts.
↑ ↓
byexspencer 2022-12-21 1 point
I've tried every version uploaded here, but none of them work. They won't start even though I select Windows XP/Vista compatibility or have rundll32 running. I can't find any solutions here or online.
↑ ↓
LazärheaD 2022-12-18 3 points
Glad this is available again as it is quite good. Back when Raven soft was free of the COD chains.
↑ ↓
PCGAMER90 2022-12-16 1 point
Oh my gosh yes!!! Finally!!! You guys f**king rock! Long live MyAbandonware! :D
