1300 feets to meters. Convert 1300 feets to meters. (2024)

Standard units of measurement were not always defined in lengths such as today. People began by using their own body as a measurement unit. Nowadays, thanks to the universally accepted units of measurement, the communication is made easier and statistics of global problems are discussed more clearly. However, it wasn’t always like this. The definition for meter and unit varied differently over the years. It makes you wonder, why the existing units of measurement are considered so accurate? Why are they more appreciated than the antique ones?

History of the meter

Even though meter is now used across the whole Europe as a standard unit, Europe once used yards and inches. People have come a long way to get to today’s meter unit. The meter unit was changing with time and under the reigns of kings, until it became standard and universally accepted.

In 1150, the distance unit, was the breadth of a man’s thumb, which was considered standard since King David of Scotland declared this “fact”.

Even more surprising is the definition of an inch centuries after that, which was:
“Three grains of barley, dry and round, placed end to end, lengthwise”

This relatively precise definition of an inch was made official during the reign of King Edward the second in the 14th century. Even though there is no proof of that, barley was used as a distance unit for hundreds of years before.

“Cubit” was also used as a unit of length measurement in ancient times. It is perhaps the most popular known antique unit. Cubit was the length of a human’s arm. More precisely it is determined by the length from the tip of the finger, positioned in right angle with the hand, to the elbow. The smaller units of a cubit were foot, hand or finger. And the larger unit than a cubit was the stride. As you have probably concluded, this unit could vary considerably because of the difference sizes of people.

All these units of measurement were valid only for Europe, while other parts of the world had their own definitions of distance units. However, in 1959, an internationally accepted unit of measurement is accepted. And so, an agreement for yard and pound is made in February the same year. An inch was officially recognized to being 25,4 millimeters.

However, the reason for the meter to be considered as accurate and be still used as a standard measure is that it uses the Earth as a reference.

History of a foot

Since there was little information on the Earth, in the history people set up the units of length by using the human body. Since the human body is different, the units of distance were not standard. Nevertheless people did their best and improvised. Archeological proofs suggest that the Romans and the Greeks also used the unit foot. It is supposed that the “foot” actually is a synonym for “shoe”. This assumption is based on the fact that people had shorter feet back then, which is why a booted foot was used.

The length of a foot in the English system was between 250mm and 335mm. The foot was usually subdivided into 12 digits, called unciae from where the English words inch and ounces are supposedly derived.

However in the 16th century, a more complex process of measuring the foot length was invented. The procedure involved 16 men who stand at the door of a church on a Sunday to be chosen for this action. They were supposed to put their feet one behind the other. It provides a certain length called rood. The 16th part of that length was the legitimate “foot” length.

In the 1100 however, King Henry of England decided that his foot should be the standard measurement for a “foot”.

Even though nowadays there are some differences in decimals when it comes to converting feet to meters, the value is very close. The difference is only two parts in a million so there is no place for concerns.
1 foot = 0.304 800 609 6012 meter

As the civilization developed so has the need for units of measurement. People did their best to answer this task, given the information known at the time. By studying the evidence of all available sources, we have managed to get an idea of the origin, history and development of the measurement units.

Hopefully we have made some interesting points for you to think about. If you have any questions or doubts, leave us a comment in the comment section bellow!

1300 feets to meters. Convert 1300 feets to meters. (2024)

FAQs

How do you convert feet to meters? ›

1 foot to meter conversion is given by 1 foot = 0.3048 m. One foot is equal to 0.3048 meters, making the meter a larger unit. To convert feet to meters, you multiply the length in feet by the conversion factor 0.3048.

What is the formula to convert from meter m to feet ft )? ›

To convert meters to feet, multiply the given meter value by 3.28084 to get the feet value.

How many meters is 13 feet by 12 feet? ›

You x the length by the width. In your case 12x13 foot is about 3.7x4m = 14.8 metres squared.

How do you convert height to m? ›

To convert inch to m, you need to multiply it by 0.0254 . For example, 18 in is equivalent to 0.4572 m . For height converter feet to meter, you need to multiply it by 0.3048 . For example, 1.5 ft is equivalent to 0.4572 m .

How to calculate in meters? ›

The formula for measuring different units in the meter are listed below:
  1. Meter = l × b × h = cubic meters.
  2. Centimetre = l × b × h ÷ 10,00,000 = cubic meters.
  3. Millimetre = l × b × h ÷ 1,00,00,00,000 = cubic meters.
  4. Inches = l × b × h ÷ 61,023.8 = cubic meters.
  5. Feet = l × b × h ÷ 35.315 = cubic meters.

What is the code to convert meters to feet? ›

Multiply any meter measurement by 3.28 to convert to feet.

If you want, you can try to do the multiplication on your own and see if you get the right answer: 1 meter x 3.28 = 3.28 feet. 5 meters x 3.28 = 16.4 feet. 2.7 meters x 3.28 = 8.856 feet.

How to remember meter to feet? ›

If you're out in the real world and need to do a quick conversion, then multiplying the number of meters by 3.28 will give you the answer you're looking for. You could make this process even easier by rounding 3.28084 up to 3.3. So, in a pinch, all you'd need to remember is: 1 meter is about 3.3 feet.

Which conversion factor would you use to convert from meters to feet? ›

The exact conversion factor is actually 3.28084 feet per meter. However, for most practical purposes, using a conversion factor of 3.28 is accurate enough. To convert a length in meters to feet, simply multiply the length in meters by the conversion factor of 3.28.

How many meters is a 12x12 room? ›

Answer: 12 feet by 12 feet is approximately equal to 13.378 square meters.

Does 3 meters equal 10 feet? ›

To convert meters to feet, you can use the conversion factor that 1 meter is approximately equal to 3.28084 feet. Therefore, 3 meters is approximately equal to 9.84 feet.

How do you convert 12 inches to 1 foot? ›

If you have 12 inches, and want to convert inches to feet, you would make a fraction of how many inches you have (12) compared to the number of inches you need for one foot (12). The fraction 12/12 is equal to 1. 12 inches is equal to 1 foot.

How to calculate m to feet? ›

So, 1 meter is equal to how many feet? When converting meters to feet, the standard formula 1 meter (m) = 3.28 feet (ft) will come into effect. Here, the conversion value is 3.28. For example, if you must convert 10 meters to feet, you have to multiply 10 by 3.28 which comes to 32.8 feet.

How tall is a human in m? ›

Average sizes of men and women

In the US, the average male is 1.77 m tall. The average US-american woman reaches 14 cm less with a height of 1.63 m.

Which is bigger, 2 meters or 40 inches? ›

Expert-Verified Answer

Therefore, 2 meters is bigger than 40 inches.

What is 5 foot 2 in meters? ›

We're required to determine the height in meters and in centimeters given the height in 5 f e e t 2 i n c h e s ( 5 f t 2 i n ) . Therefore, given the height of 5 f e e t 2 i n c h e s , its equivalent height in meters and centimeters are 1.5748 m e t e r s and 1.5748 c e n t i m e t e r s respectively.

How to measure a meter with your feet? ›

That is one meter is equal to 3.28 feet and one foot is equal to 12 inches as per rule. So, to convert meter to feet just simply multiply the number of meter to the value of feet per meter. Conversion of Meter into foot = Number of meter / Number of feet per meter.

How to measure 10 meters in feet? ›

10 meters x 3.28084 = 32.8084 feet. Therefore, 10 meters is equivalent to approximately 32.8084 feet.

Top Articles
Latest Posts
Article information

Author: Melvina Ondricka

Last Updated:

Views: 5481

Rating: 4.8 / 5 (48 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Melvina Ondricka

Birthday: 2000-12-23

Address: Suite 382 139 Shaniqua Locks, Paulaborough, UT 90498

Phone: +636383657021

Job: Dynamic Government Specialist

Hobby: Kite flying, Watching movies, Knitting, Model building, Reading, Wood carving, Paintball

Introduction: My name is Melvina Ondricka, I am a helpful, fancy, friendly, innocent, outstanding, courageous, thoughtful person who loves writing and wants to share my knowledge and understanding with you.